A Full Underlighting Kit for your RV or other Vehicle. These very bright RGB POD Lights, cables, and control box are fully weatherproof. Do not use strip lights under a vehicle, this is the correct way to get Color Changing Lights Underneath. These are also great for trucks, off road cars, or any other vehicle you want to stand out when parked. Works with standard 12 volt systems.
RGB lights can be set to any color, set to change colors automatically, or set to Cool White. These are bright PODs with quality LEDs, only the best as always with M4. The PODs have a full aluminum body that works as a heat sink for durability and long life.
The cables provided are Plug and Play and setup specifically for the length of an RV. There are 8 PODs total. The controller has two wiring legs, each with 4 PODs and extended a full 43 Feet (each leg) from the Control Box. The Control Box is weatherproof as well so it can be mounted under the RV, in the engine compartment, or anywhere else you like.
Easy 12 volt DC two wire connection, Power and Ground after you put the PODs on the harness with their indexed weatherproof connectors.
Be sure to look at all of the pictures for more product details.
Do you want to double the number of RGB Lights to 16, than also purchase our RGB ADD ON KIT
Do you need longer legs in certain areas, purchase our RGB EXTENSION CABLE
May ship FedEx Ground to some locations due to the weight. CANADIAN CUSTOMERS: This cannot ship via the shipping calculator due to the weight. To ship to Canada you must call in and get a shipping quote.
Not to be used while driving or on public roads.
12 Reviews Hide Reviews Show Reviews
The remote is wonky. The lights are okay but leave pools of light under my 40 ft class A versus a continuous light. They're okay great but could be brighter. Which is why I bought the expansion kit but the expansion kit does not allow me to run the wiring back behind the axle to get the last part of the motorhome. So it looks kind of dumb lit up but the back dark. A different kind of extension would have been better than just a short y connection. The hardware was okay but I would have preferred something a little bit beefier. Time will tell if they rust or not. I need to install a on-off switch with it too because the remote is unreliable for turning the thing off. If you want to go in and pull the fuse each time you have to drive you can but that seems kind of redundant. So for a shorter RV this will work fine but not exactly happy with it on my coach. If I could get it installed so that it covered everywhere I would have given it a higher rating. M4 Notes: I have sent the customer an email. We have an extension cable kit listed in the RGB section which he must not have found. On the product listing is a full diagram of the lengths of the main cables and also the double up kit cables, he perhaps did not look at the full product description and pictures. Most pushers that are long do not put them behind the rear axel because of the harsh environment back there, but the extension cables would do that. I have never had any remote complaints so I have requested more information. We were not contacted for tech support, if you ever have a question please email or call us and ask.
I found that laying them out and having a plan is must. I have a 40' class A and ended up installing a total of 4 between left and right axles, 2 between rear axle and rear of coach, 2 across the rear near hitch and 2 across the front. Needed add on kit and extension cables. Had to be creative with making brackets and hiding cables. I wanted the lights to have even spacing as much as possible. The remote has great range. Coach is on side of house. I can turn them on from inside. My only ( not comlpaint) is I wish there were a variety of extension cable lengths. I would recommend this product.
The construction and set up was very nice, but even with the additional 8 pods under my rv I was disappointed with the brightness of the lights. Neat design and the waterproof connectors are really nice, just wish they put out a little light especially with the additional lights underneath. M4 Note: Ensure that on the remote the brightness + is turned all the way up. These are underglow lights which provide a "UFO" effect. They are not as bright as work lights nor intended to be, nice balanced accent lighting. Ambient light conditions of course will also affect the perceived brightness.
Installed on a Oliver Elite II 23.5' trailer. Eight lights provide plenty of light. I'd give it five stars if the wiring harness to the control unit was detachable. Spent hours wiring in the harnesses, if the control unit fails I'd have to replace everything. Robust kit and happy so far!
Great quality construction. The sealed connectors and premade harness made for a very easy installation on my 42’ 5th wheel. The only negative are the supplied screws. They break to easily going into predrilled a steel frame. Used better quality sheet metal screws. M4 Note: As noted, they are best for sheetmetal or soft materials. Predrilling they can generally be used, go up a size on the drill bit or use machine screws.
I’ve had my M4 Products under RV light kit installed for over 2 years and many miles! I love them! They are very durable, easy to install, and use! Four of the pucs look great from wheel to wheel on my 36’ coach. If you’re looking for more than that get their doubling kit! You won’t be disappointed with these or any M4 Product! I have a coach full of them!
Great product ! But the pods could be a little brighter light under your motorhome you need to get two sets for a 34ft or longer class A to make it very noticeable, maybe a 10 pod set would be great for each side ! But we love it !!! M4 Note: Some people like more light, for them we offer the Double Up Kit here: https://m4products.com/underlight-double-up-kit-must-be-used-with-rgb-underlight/
Straight forward installation and looks amazing under or RV.
Also have one light that is not working correctly. Only shows a rainbow on the ground. M4 Notes: Spoke to Oscar after he posted the review. Regarding rainbow, he is switching locations of two lights and will report if there is still an issue, there is no need for a rainbow unless something is different in the mounting as they are all manufactured the same, there is probably an obstruction. Per the instructions, "Included self tapping screws are for light sheet metal only, anything thicker predrill or drill through and use nut and bolt hardware" (included). He was trying to use the light self tapping screws through the frame of the vehicle which is much too thick.