Product Description
Click Image for more pictures and specifications and installation instructions.
This is a 12VOLT tube. Some RV and Boat fixtures (Thinlite) use a 120v florescent tube light which uses a ballast that converted 12vdc to 120v to light the light. With this light you must eliminate this troublesome ballast and just supply the tube with 12v power, positive to one end of the tube, ground to the other. A simple fixture rewire is required. Do not install these into a 120v environment or they will be damaged the the warranty void.
Rotatable End Caps so they will fit in fixtures with either horizontal or vertical sockets with a simple 90 degree twist of the end cap.
36" T8 12v Tube Light Replacement. Standard Size F30T8 T8 Tube, Actual Size 35 1/8" excluding pins, or around 36 3/4" including the pins.
6000K Cool White, for 4500k Natural White see part number T8-36TUBE-NW
Installation of this tube is the same as our 18" tube lights. Remote or bypass the florescent ballast is required.
NOTICE: Requires a simple rewire to the fixture to eliminate the wasteful and troublesome ballast. See the link below for typical installation instructions for T8 tubes. Do not install these into a 120v environment or they will be damaged the the warranty void.
- PREVIEW THE GENERAL INSTALLATION INSTRUCTION HERE
- Go to M4Sales.com to see our Resource Center with additional fixture pictures and instructions
Specifications:
- Includes 1 Tube Light, Wire Nuts, and Extra Wire.
- 15w, 12 Volts replaces a 36w florescent
- Brighter, no flicker, no warm up, and no expensive ballast to fail.
- Frosted lense covering 120 3528 SMD LED chips so you do not see the individual leds when you look at the light.
- 6000k color range is Cool White.
- Power through the end pins so you don't have a wire hanging out the side of the bulb to be seen.
- Non Polarity, one end of the bulb gets power, the other side gets ground. Installs either direction.
- Basic rewiring of the fixture is needed to eliminate the florescent tube ballast
