Product Description
Click Image for more pictures and specifications and installation instructions.
View the full detailed installation instructions here
This is a LED retrofit light for 12" Florescent Tube Lights. Due to the size of these smaller tube lights, an external driver is provided. This driver converts 10-30v DC RV power to a clean 12v DC power for long tube life. Other brands of retrofit tube lights have a wire and the driver hanging out the side of the tube, we choose to provide the driver separately and we utilize the natural pins on the end of the tube for power for a much cleaner looking installation. Since the driver occupies the space of your previous ballast, you will never see the wires or driver while looking up at your fixture.
4500k Natural White. For 6000k Cool White see part number T5-Tube-CW. Though not as popular, this tube is also available in 3200k Warm White part number T5-Tube-WW for those that want a Warmer Look.
You will need basic 12vDC wiring skills to install these tubes, or have them professionally installed. Wiring is basic, each driver gets a positive and negative wire connected, and each driver has a positive and negative wire that need to be connected to the end of each tube. View the full detailed installation instructions here Not recommended to be used near HAM radio or in close proximity to sensitive radio or tv equipment.
- 9-12vDC Tube Light with a 10-30vDC driver
- Draws only 0.24A at 12.8vDC
- 27 2835 SMD LEDs
- Sold Per Tube, for fixtures with two tubes you will need to order Qty of 2
Specifications | |
Item Number | T5-12TUBE-NW |
Color Kelvin | 4500 |
Calculated Lumens | 410 |
Amps at 12.8v DC (Fluke Actual) | 0.24 |
Rated Volts | 10-30v DC |
Polarity | Non Polarity Driver |
Overall Length | 11 1/4" w/o pins, 11 7/8" with pins |
Overall Width (or diameter) | 3/4" |
Overall Height | n/a |
Other Details
2 Year WarrantyProduct Videos
Custom Field
Product Reviews
98 Reviews Hide Reviews Show Reviews
-
RV Lighting
Very fast shipping! The quality of the lights are excellent and after watching the RV Geeks install they were easy to install. The instructions that were included were for another light and maybe would work for these but i just watched the video to install. Would buy again as i change them out.
-
Coverting to LED
Product and directions were great. The difficult part was the narrow thin fixture not having enough space to fit all the drivers. It took some time but I got it> Lights are great. So much brighter.
-
Let there be light - bright light
I changed out 3 fixtures which each had (2) t-5 florescent tubes. Directions were exact and easy to follow. Each one took less than 10 minutes to complete. So much brighter with no dead spots in our 190 Roadtrek. Very happy!
-
Great conversion kit and excellent cutomer service
I converted six 12" florescent bulbs in 3 fixtures using M4 LEDs in our Class B van. One of the six LEDs was noticeably brighter than the other 5, and the measured voltage across the LED was ~2 volts higher than the others. I contacted M4 by email, and response from Steve was immediate. After reviewing my installation via photos, Steve sent out a replacement driver which resolved the difference. Thank you so much Steve, for your quick response, concern and verification of correct installation, and for your well designed conversion kit with great instructions.
-
Brighten up the RV
Replaced 12 inch florescent bulbs with LED. Instruction were good and YouTube video really helped. LED is much brighter. Have only used a small amount so will see how things go in next 6 months
-
Excellent
Starting to convert as many lights as I can in my Airstream Travel Trailer and found these bulbs. They were very easy to install and the finished look is almost identical to the original look. Unless you look really close you would think that they were the original Florescent bulbs. The brightness was almost a perfect match also. Very pleased with the product. A little pricey to switch over but I will never have to replace the bulbs again.
-
What a Difference
changed over 8 double bulb lights fixtures after 1st one rest went fast. Took a little longer having to drill rivets out for ballast coverbut what a difference in light. after taking ballast out can see why drains batter so fast. thank you
-
Thin-lite tube to LED
12" tube to LED somewhat labor intensive. There are other LEDs at a lower price but previous contact/presention weighed in decision to purchase. YouTube series by RVGeeks aided greatly with install. To increase space I removed the ballast which did give added room to tuck away the necessary wires. Also, I used a couple of automotive ties to help tidy wires for convenient ballast cover replacement. M4 Note: You can preview the instructions on our site. In a nutshell, for each tube there are four wires to connect to a driver. Two out, black and red, one to each end of the tube. Two in connect the the two coming into the fixture, through the switch if you have one. Do one tube at a time to simplify it.
-
Fulfilled all expectations.
Easy install if you watch the RVGeeks YouTube video 1st. Bright, instant-on lights. Will order more as my fluorescents burn out.