Click Image for more pictures and specifications. Buy 10 per SKU and save 10%.
The latest design for very small LEDs, these can be used anywhere a #168 / #194 or similar size bulb is used as it is about the same physical size. The LEDs inside point side to side, and the covering disperses the light further.
Great for marker lights where the bulb plugs straight into the back of the fixture, or other fixtures that are shallow and won't fit our T10-5-5050-CW. When possible, use the T10-5-5050-CW for a little more light and for fixtures lay sideways. This item is only avaialble in Cool White, if you need a Warm LED similar in size look at the T10-5-5050-WW.
Use VERY Little Power
2 Cool White LEDs with 3d cover to distribute light
Easy push-wedge installation
Standard T-10 Wedge Base
Replaces Incandescent Bulb #168, #906, #194 and other miniature glass wedge based bulbs
|Amps at 12.8v DC (Fluke Actual)||0.01|
|Rated Volts||12v DC|
|Overall Width (or diameter)||3/8"|
8 Reviews Hide Reviews Show Reviews
Great for markers very bright
Exact replacement for a 194 running light. Bright for sure . Would certainly purchase again!
I wanted to use these bulbs for roof mounted cab lights but they don’t look good the color is off
M4 Note: As noted in the description (and pictures), these are Cool White 6000k in Color. We also have them in Amber for under Amber lenses. They will be brighter, and should only have a real color issue if your lenses have faded from age. They are not incandescent yellowish nor should they be.
We have lights on the posts of our deck which is on three plus sides of our house. The 31 lights focus downward to illuminate the walking area of the deck without light pollution. The old bulbs were incandescent and were yellow. The new LED lights are white and provide approximately the same light. We bought the enclosed bulbs because the bulbs are exposed to the elements (snow, rain, wind, dust).
Overall the replacement bulbs are a nice change and should last a lot longer. The old bulbs typically required replacement every 2-3 years. The white led light is a definite improvement.
Hard to find an omnidirectional bulb in a wedge base. This one is a bit dim, but will serve the purpose. Last incandescent bulb in the camper is now an LED!
M4 Note: Most exhaust vents are a #921 or #912, not a smaller #168 wedge that this replaces. We usually recommend a 921-10-5630-CW for this location which would provide much more light.
Bought 4 to replace old license plate and side marker lights on 2000 Miata. Little cars need all the visability they can get. Very white light and bright. What's not to love.
I like being seen by others when I am on the road. Trading the old lamps for brighter LED lamps. I also noted the old lamps were hot to the touch. Easy retrofit.