Click Image for more pictures and specifications. Buy 10 per SKU and save 10%. See the bottom of this description for fitment information.
The best solution for the smallest fixtures. Very bright 5630 LEDs. Fits with reflector in place on most fixtures. Standard Pin Thickness 0.37"/1mm fits most fixtures, slightly larger for tight fit.
Warm White (replicated incandescent light) part number G4-6-5630-WW
Natural White (outside light, slightly warm) part number G4-6-5630-NW
Cool White (bright white, brightest visually) part number G4-6-5630-CW (this item)
- Massive heat reduction
- 6 5630 SMD LEDs. 5630 are brighter than 5050 LEDs
- Dimmable with slide or rotary dimmers.
- Similar Light as the 10w halogens without the heat.
|Amps at 12.0v DC (Fluke Actual)||0.07|
|Rated Volts||10-15v DC|
|Overall Length including pins||1 1/4" / 30mm|
|Overall Width (or diameter)||7/8" /22mm|
3/16" / 5mm
When replacing most standard halogens, Thin Pin (-TP) drops into the socket easier. Some original halogens do have thicker pins though and the standard (thicker) pin will fit better, and the standard pin typically is better when replacing other existing LEDs.
Fit: This LED fits best in fixture with less than 1 1/2" at the measurement below:
30 Reviews Hide Reviews Show Reviews
see my review on Globe LEDS These are very bright - works well under cabinets in bathrooms - entrances - going to order a lighter shade for the Misc. ceiling lights
there is alot of light cans in my Trailer that were using the old Halijon bulbs so these had to much output for that many cans
Awesome service on my shipment! The quality of the product is better than I was expecting, retrofitting went well. They are so much cooler that the halogen bulbs. The website was very informative and easy to locate what I was looking for. Highly recommend, thanks M4!
Prompt service from M4, easy install, great lighting. Will buy again.
Our 2009 RV was in need of updating for our ceiling lights. The 10 watt halogens were too hot during continued use and the yellowish color wasn’t very appealing.. The changeover to LED lighting has made a big difference in brightness and low power draw..
we’re not done yet and we’ll continue to upgrade as our budget allows
great replacement bulb for work areas, installed them over our kitchen and bathroom sinks. much better lighting and much less power consumption.
Nothing wrong with these bulbs, but I should have gotten the natural White and not the cool. They are a little too blue for my small space of the fridge.
Plan to reorder in nature.
The replacement LEDs do increase total light on table area but tuff to install the wire push in lights. There must be a smaller wire unit that goes in the socket easier and all the way. The lights I purchased were for the smallest holder but still hard to get inside the puck. I did get all in place now and will need more travel time to see if they stay in the puck light.
M4 Note: Customer ordered the normal size pin, not the thin pin. The thin pin version is part number G4-6-5630-SIDE-CW-TP
The OEM bulbs were a constant pain. They were forever not working. Never know if they are burned out or loose or what. I replaced all with the LED from M4 and am very happy with the ease of installation, no mods required and the light is much better. I had one fail after close to a year and it was replaced free of charge. Excellent company to deal with.
Bit of advice, contact M4 before you order these to make sure to get the correct bulb. I speak from experience.........