Product Description
Click Image for more pictures and specifications. Buy 10 per SKU and save 10%. See the bottom of this description for fitment information.
The best solution for the smallest fixtures. Very bright 5630 LEDs. Fits with reflector in place on most fixtures. Standard Pin Thickness 0.37"/1mm fits most fixtures, slightly larger for tight fit.
Available in:
Warm White (replicated incandescent light) part number G4-6-5630-WW
Natural White (outside light, slightly warm) part number G4-6-5630-NW
Cool White (bright white, brightest visually) part number G4-6-5630-CW (this item)
- Massive heat reduction
- 6 5630 SMD LEDs. 5630 are brighter than 5050 LEDs
- Dimmable with slide or rotary dimmers.
- Similar Light as the 10w halogens without the heat.
Item Number | G4-6-5630-CW |
Color Kelvin | 6000 |
Calculated Lumens | 210 |
Amps at 12.0v DC (Fluke Actual) | 0.07 |
Rated Volts | 10-15v DC |
Polarity | Non Polarity |
Overall Length including pins | 1 1/4" / 30mm |
Overall Width (or diameter) | 7/8" /22mm |
Overall Height |
3/16" / 5mm |
Fitment:
When replacing most standard halogens, Thin Pin (-TP) drops into the socket easier. Some original halogens do have thicker pins though and the standard (thicker) pin will fit better, and the standard pin typically is better when replacing other existing LEDs.
Fit: This LED fits best in fixture with less than 1 1/2" at the measurement below:
Product Videos
Custom Field
Product Reviews
32 Reviews Hide Reviews Show Reviews
-
Installing Puck Lights
The replacement LEDs do increase total light on table area but tuff to install the wire push in lights. There must be a smaller wire unit that goes in the socket easier and all the way. The lights I purchased were for the smallest holder but still hard to get inside the puck. I did get all in place now and will need more travel time to see if they stay in the puck light. M4 Note: Customer ordered the normal size pin, not the thin pin. The thin pin version is part number G4-6-5630-SIDE-CW-TP
-
No More messin with the OEM bulbs
The OEM bulbs were a constant pain. They were forever not working. Never know if they are burned out or loose or what. I replaced all with the LED from M4 and am very happy with the ease of installation, no mods required and the light is much better. I had one fail after close to a year and it was replaced free of charge. Excellent company to deal with. Bit of advice, contact M4 before you order these to make sure to get the correct bulb. I speak from experience.........
-
Hit or miss
These dont fit the light fixtures real well, and not all of them work straight out of the package. I had one in the package that did not work at all. M4 Note: We followed up with the customer. On this model, the purchase was made a year ago and he had one DOA which was never reported to us. We handle DOAs (which are rare) right away when contacted. On some fixtures, the LED will sit at an angle due to the socket angle. With the cover on, it is not noticeable unless staring right up at the light. He was also unaware that there is a Thin Pin (TP) version available that fits tighter sockets.
-
Another great bulb from M4
This bulb is an excellent upgrade to our ceiling puck lights. The brightness and color are perfect for us. We will be reducing the brightness in different areas as we continue the upgrade of our 45 footer. This is our second coach we have upgraded with M4 product's bulbs and have yet to be disappointed. Very satisfied.
-
excellant light!
I am very satisfied with these lights. I purchased both the small and larger lights, I am completely happy with them.
-
Excellent product
Like another reviewer, I found they barely fit, but they did. I reinstalled the fixtures so the light tended to shine into the coach instead of toward the sidewall or windows, as the "bulbs" were not quite horizontal. I will probably be the only one to notice. I liked these because they do not have exposed components and circuits on the backside. I selected these bulbs because I had noticed in one of the RVGeeks videos on LED lighting that they had the exact same reading light fixtures I had, so I bought the same bulb they used. Thanks for the RVGeeks 5% discount also.
-
works great,'but barely fits!
I got these to replace some mini halogen bulbs I got tired of replacing. I measured the lamp reflector to ensure the size was correct. Even though these are the smallest size, I was barely able to get them installed and working. The led plates are still at somewhat of an awkward angle, they do work and provide a nice bright white light. I would be more comfortable with them if they installed flat and parallel to the lens. None the less, the work great. M4 Note: Some fixtures are very small and won't fit most LEDs. This is the industries smallest. They can sit at an angle in the smallest fixture, once the cover is on you won't notice the difference.
-
RV LED Light Conversion
Converting original lights in My RV to LED Great Product. With Your assistance got the right size the First Time. Packaged was also very good I would recommend Your Product
-
Great LED light
I order them on a Monday had them on Wednesday great fast shipment .The light look like really good quality . Installed them they all went in very easy and they our very bright I love them . Thank for all the support you offered . I will tell all my friends about the M4 LED light Thank You