Product Description
Click Image for more pictures and specifications and installation instructions.
This is a 12VOLT tube. Some RV and Boat fixtures (Thinlite) use a 120v florescent tube light which uses a ballast that converted 12vdc to 120v to light the light. With this light you must eliminate this troublesome ballast and just supply the tube with 12v power, positive to one end of the tube, ground to the other. A simple fixture rewire is required. Do not install these into a 120v environment or they will be damaged the the warranty void.
Rotatable End Caps so they will fit in fixtures with either horizontal or vertical sockets with a simple 90 degree twist of the end cap.
36" T8 12v Tube Light Replacement. Standard Size F30T8 T8 Tube, Actual Size 35 1/8" excluding pins, or around 35 3/4" including the pins.
4500K Natural White, for 6000k Cool White see part number T8-36TUBE-CW
1250 Calculated Lumens
Installation of this tube is the same as our 18" tube lights. Remote or bypass the florescent ballast is required.
NOTICE: Requires a simple rewire to the fixture to eliminate the wasteful and troublesome ballast. See the link below for typical installation instructions for T8 tubes. Do not install these into a 120v environment or they will be damaged the the warranty void.
- PREVIEW THE GENERAL INSTALLATION INSTRUCTION HERE
- Go to M4Sales.com to see our Resource Center with additional fixture pictures and instructions
Specifications:
- Includes 1 Tube Light, Wire Nuts, and Extra Wire.
- 15w, 12 Volts replaces a 36w florescent
- Brighter, no flicker, no warm up, and no expensive ballast to fail.
- Frosted lens covering 72 2835 SMD LED chips so you do not see the individual LEDs when you look at the light.
- 4500k color range is Natural White.
- Power through the end pins so you don't have a wire hanging out the side of the bulb to be seen.
- Non Polarity, one end of the bulb gets power, the other side gets ground. Installs either direction.
- Basic rewiring of the fixture is needed to eliminate the florescent tube ballast
Product Videos
Custom Field
Product Reviews
16 Reviews Hide Reviews Show Reviews
-
T8-36TUBE-NW Natural White 36"
Replaced my old florescent lights in the kitchen dining area of my 2005 Monaco Camelot and WOW, what a difference with these 36" LED Tube lights. Steve, at M4 is easy to work with and is a wealth of knowledge. Shipping was quick, instructions were excellent and the installation was easy. New lights were much brighter, no flicker and no static on the AM radio. Can't say enough about the quality of the products from M4. Can't go wrong with these lights or M4 products.
-
Great light!
The light is perfect for our motorhome. It lights up my kitchen like it was broad daylight. Love it!
-
converting florecent light to LED
I installed the new LED tubes yesterday and they work excellent. The installation was easy-pezzy, just hooked the hot wire to one wire on "one end" of the tube, and the ground to one wire on the other end of the tube, and that was it. They are much brighter tHan the old lights, and draw much less power. I'm a happy camper for sure.
-
I can now see in my bathroom!!!
Changed out the old tube lights in my bathroom. WOW, what a difference! Easy wiring, one wire to each side of the fixture, mine has two separate fixtures. Thanks Steve
-
RV LED Replacement for our kitchen
I replaced the four 36" florescent bulbs with LED tube lights, 4500K. Very easy to change out and eliminated the ballasts (one of which was bad). The light from the LED's are brighter and put out a more natural light. They are definitely worth the money. We now have most of the fixtures in our RV retrofitted with LED's and are very happy.
-
bright
Easy install. Just as bright as the 30 watt fluorescent bulbs they replaced.
-
perfect upgrade!
This is just what I needed to upgrade my 12 volt P.D.R. lightstand from a florescent. The light it gives off is better and my battery goes alot longer between charges.
