DOORBUSTER: 60% Off - Non-Returnable
If you have flush mount articulating "Eyeball" fixtures (see the pictures for the fixture type), this retrofit LED is what you need. The LED comes with a socket adapter and wire nuts just for this type of retrofit. You can also use this in place of other MR-11 sized light. note that it may not fit some MR-11 fixtures with narrow back, refer to the pictures for the size of this LED. Does not include gold fixture in pictures, just the retrofit items to convert it.
INSTALLATION NOTE ON THIS ITEM: Ensure you have a 2 1/2" deep clear area in the mounting surface to clear the length of the assembly. This should not be a problem in ceiling installations, but the depth may be limited in installations under cabinets. If you do not have the depth, consider using our replacement LED G4-HP3W-CW or G4-HP3W-WW.
Includes general instructions for installation in Eyeball fixtures, you can review them by Clicking Here. Fits fixture Valany Import Model 7429R and others.
A bright 3 watt light with a COB LED in it. Much better than other MR-11s on the market. Dimmable with Standard rotary or slide dimmers. Heavy aluminum heat sink. MR-11 pins are the same width as G4/T3 pins, 4mm apart. MR16 pins are larger and wider.
|Amps at 12.8v DC (Fluke Actual)||.23|
|Rated Volts||12V DC or AC|
|Overall Length (w/o base)||1 body, 1 3/4" incl. pins|
|Overall Width (or diameter)||1 3/8"|