This is a headlamp kit that includes two replacement LED bulbs, and two control drivers. Drivers plug right into your existing vehicle harness. Ulight 6s uses a Edison DF-4BS LED and is a fan-less design. This is the latest 6s version which supersedes the V7. The LEDs on the blade are at the exact same depth as a standard bulb so that the light is reflected properly out of the fixture. Work with most Daytime Running Lights at they illuminate at 6 volts to 32 volts.
LED lights are brighter than stock, as bright as HID without the warm up time and use less power.
HEADLIGHTS DO NOT SHIP TO CANADA
Model 9007: Dual Beam (Low and High) HB5
Lumens: Around 6000 per pair, a brighter light for you without blinding others.
Kelvin Color: 6000k
Ensure there is room for the heat sink on the back of your bulb in your vehicle. Beam pattern is adjustable by rotating the LED (hex key included). Non-vehicle specific instructions included.
Not sure what fits your vehicle? Here is a common lookup tool.
General Installation Instructions
Supplemental Instructions for 9004 and 9007 with Retaining Collars
This is not a DOT compliant tested light, similar to HID modules. Your light fixture is DOT certified and the light control is very similar to your original halogen bulb. Please use at your discretion.
24 Reviews Hide Reviews Show Reviews
VSS with 9007 bases
Lights are very bright and very easy to install.
9007 (HB5) Headlight Kit
Having gotten a late start on a recent trip home from northern Wisconsin, we found ourselves driving in total darkness. It was right then and there that I realized how utterly pathetic the standard OEM halogen light bulbs were on our 2017 Holiday Rambler motorhome. Seriously, using only the low beams, I was having difficulty seeing the road, especially in areas where the pavement lane markers were badly worn or gone altogether. It was only after a vehicle passed us with LED headlights, that I realized how poorly the halogen lights on our vehicle were performing. When we got home, I told my wife, "I will never drive this thing again at night until I replace the headlights with LEDs." Enter M4 Products - my go-to source for everything LED. We have four headlights - low beam/high beam. I ordered two of M4 Products' 9007 (HB5) Headlight Kits and installed them on our motorhome. We keep the motorhome inside the garage and I had the overhead door completely closed when I installed the new lights, so that I could take before and after pictures of both high and low beams with the existing halogen lights, then, with the new LED lights. Mind blowing difference! If I could upload the pictures here I would. Again, M4 Products knocked it out of the park with a world class LED product for our RV. Cannot praise enough. I'll be back!
These are by far the best headlights upgrade I could have hoped dreamed of for our motorhome! Huge difference in night driving!
LED Headlight Kit with 9007 Bases
I had purchased new headlights for our Motorhome and they came with new Halogen bulbs and yes they were bright but not enough and we viewed some RV full timers on YouTube and they recommend M4 Products so we purchased the kit, the install was very easy (direct replacement fit) and I did one side and turned on the headlights and was blown away because they were so bright compared to the Halogen which looked yellow compared to the LED's! regret not doing this sooner!
2013 Winnebago Vista 30T- could barely see with stock headlights. Replaced with this product and incredible difference! Night and day difference. A must upgrade!!!
Headlight conversion kit
This product is amazing really plug and play. My 2000 Newmar RV headlights were not bright at all but in 15 mins I was able to install the 5 Star kit and now i have superb night visibility wonderful product at a transom able price. Highly recommend.
I bought the 9007 led headlight kit for my 2004 fleetwwood Discovery and what a difference no comparison to the old ones at least four times brighter.
Thanks for the fast shipping and easy to install instructions.
9007 HB5 Headlight Kit
Installation was fairly simple. As per instructions I had to cut down the retaining rings for my particular installation. Only took a few minutes with the dremel cutting disk. Only problem was the allen wrench provided in the kit didn't fit the assembly (too small) The allen is needed to pull the retainer off the light to permit installation of the cut down retaining ring. All in all, though not completely plug and play, installation was easy and I am delighted with the results. MUCH brighter than OEM. M4 Note: I just checked all of our kits in stick and the hex key fits the screws on all of them so I am not sure what happened in that case. Perhaps a malformed hex key in the kit. Contact us with any issues, we could have sent our a proper hex wrench.