Product Description
This is a headlamp kit that includes two replacement LED bulbs, and two control drivers. Drivers plug right into your existing vehicle harness. This is the latest Ulight 6s version which supersedes the V7. The LEDs on the blade are at the exact same depth as a standard bulb so that the light is reflected properly out of the fixture. Work with most Daytime Running Lights at they illuminate at 6 volts to 32 volts.
LED lights are brighter than stock, as bright as HID without the warm up time and use less power.
HEADLIGHTS DO NOT SHIP TO CANADA
Model 9006: Single Beam also known as a HB4
Lumens: Around 6000 per pair, a brighter light for you without blinding others.
Kelvin Color: 6000k
Ensure there is room for the heat sink on the back of your bulb in your vehicle. Beam pattern is adjustable by rotating the LED (hex key included). Non-vehicle specific instructions included.
Not sure what fits your vehicle? Here is a common lookup tool.
General Installation Instructions
This is not a DOT compliant tested light, similar to HID modules. Your light fixture is DOT certified and the light control is very similar to your original halogen bulb. Please use at your discretion.
Product Videos
Custom Field
Product Reviews
32 Reviews Hide Reviews Show Reviews
-
Big improvement
These headlights are easy to install, much brighter than the old lights.
-
Headlamps
These headlights are excellent.
-
Headlamps
These headlights are excellent.
-
headlights
great product fast shipping and unbelievable visibility
-
Headlights
I have not tried these at night yet but looking forward to seeing the difference over the old halogen lamps. Customer service from Steve is some of the best that I have seen from the company. I look forward to Purchasing more lamps in the future once I figure out what I need.
-
Driving lights
This is the 3rd pair of headlights we have purchased. Have them on our motorcoach, FJ and suburban
-
Headlight kit
Incredible results. Easy install. Could not be happier with the end result. Thanks M4.
-
Brightness awesome! Fit into housing is CRAP! (VERY LOOSE)
The o ring around the lamp does NOT seal in housing... dust and dirt WILL enter as they heat up and cool off. The lamp is very loose in the housing, I had to tighten retainers in housing and to use tie straps to keep bulb from falling out of housing. When they built this led assembly they obviously were unable to match OEM mounting specs, its a shame too because the light is AWSOME! (I am a retired mechanic of over 45 years) Let the Buyer beware!!! M4 NOTE: We are contacting Rik and trying to determine what is different in his installation as compared to all other 9006 installations we have encountered in 5 years. Something is up and there are not generally "loose" reports, refer to all of the other reviews. As always, reach out to us on any issues. Rik reached out and we gave some recommendations, but then he did not reach out again when he was not satisfied. We really are here to help. Additionally, I do not recommend using them if they are not fitting properly, we will either resolve the issue or take a return. Buyer Beware and Crap is a bit strong Rik. I have asked for picture of his original bulb and a measurement of the fixture to determine what is different from every other installation, as these are industry standard size parts, something is up that we are not seeing.
-
Don't think twice, you NEED these!
We bought both the 9006 and the 9005 to replace our headlights and high beams in a Tiffin Allegro Open Road that is 12years old. I wish I had known about this when we bought it 18months ago! It is literally the difference between day and night and has made driving after hours so much safer. These headlights are so bright I barely use the high-beams at all. I think about all the miles struggling to see as we do most our driving at night and kick myself for not doing the LED conversion earlier. It was SO simple, we did it in a rest stop parking lot in less than 20mins for all 4 bulbs. These are 100% worth the money, I promise you.
