Product Description
Click Image for more pictures and specifications. Buy 10 per SKU and save 10%. See the bottom of this description for fitment information.
The best solution for the smallest fixtures. Very bright 5630 LEDs. Fits with reflector in place on most fixtures. Standard Pin Thickness 0.37"/1mm fits most fixtures, slightly larger for tight fit.
Available in:
Warm White (replicated incandescent light) part number G4-6-5630-WW
Natural White (outside light, slightly warm) part number G4-6-5630-NW (this item)
Cool White (bright white, brightest visually) part number G4-6-5630-CW
- Massive heat reduction
- 6 5630 SMD LEDs. 5630 are brighter than 5050 LEDs
- Dimmable with slide or rotary dimmers.
- Similar Light as the 10w halogens without the heat.
Item Number | G4-6-5630-NW |
Color Kelvin | 4500 |
Calculated Lumens | 210 |
Amps at 12.0v DC (Fluke Actual) | 0.07 |
Rated Volts | 10-15v DC |
Polarity | Non Polarity |
Overall Length including pins | 1 1/4" / 30mm |
Overall Width (or diameter) | 7/8" /22mm |
Overall Height |
3/16" / 5mm |
Fitment:
When replacing most standard halogens, Thin Pin (-TP) drops into the socket easier. Some original halogens do have thicker pins though and the standard (thicker) pin will fit better, and the standard pin typically is better when replacing other existing LEDs.
Fit: This LED fits best in fixture with less than 1 1/2" at the measurement below:
Product Videos
Custom Field
Product Reviews
60 Reviews Hide Reviews Show Reviews
-
G4-6-5630-SIDE-NW Natural White Elite Series Smallest G4 / T3 Samsung 5630 LEDs Side Pins
Just replaced nearly all of my G4 "Small" 10w Halogen Puck Lights in my 1999 2650 Jayco Discoverer and I'm glad I did. The light it projects is definitely "different" than the halogen bulbs with no obvious heat emanating from them at all. The halogens got "blistery" hot and threw out a more yellowish beam. The LED's have a more uniform light pattern than the halogens which I prefer. I "Dry Camp" for a week or more at a time. One of the main concerns was draining my TWO Group 27 Deep Cycle/Starting house batteries while camping. I always worried about leaving the 12v halogen lights on. My wife left two halogen reading lights on accidently just before the LED conversion. They were on all day long (about 10+ hours) while we were out on the lake fishing. Both of my one year old Group 27 Deep Cycle batteries were drained so low I couldn't even start my generator. AFTER the LED conversion, just to test the low draw LED theory, I left THREE reading lights on FOR THE ENTIRE WEEKEND. I turned them on early Friday evening and went out Sunday evening (48+ hours total...) to see how "bad" my batteries were going to be. First I pushed the battery indicator switch to see what it showed and to my surprise it was still at the top of the gauge. I flipped all the 12v lights on in the entire RV and the "indicator" dipped to the second from the top indicator light. ( I still have a 2-3 more halogens to swap plus a couple fluorescents to0...) After turing on every 12v light I had I pushed the button on my generator and it fired up with strain at all. That meant the house batteries were still up to charge. Long story short, the LED's will allow me to stay out longer without the 12v draw worries. I also use a CPAP when I Dry Camp with an invertor and NEED to have the two 12v house batteries up to snuff the entire time overnight. I attribute the fact that the batteries are lasting much longer now because of the small draw from my LED light use at night. And, I'm always have on 3-4 of the reading lights on all evening long. I would recommend these LED's to all RVer's...I also just changed ALL of my lights on my boat over to LED's from M4 Products. I sleep overnight on the boat on occasion and use an "Anchor Light" when anchored on the river. Again, I NEED to use a CPAP and use an inverter to change 12v to 110v. Using the LED Anchor Light has made it possible to "relax" and not worrying that my batteries won't last the night to keep the CPAP going. Batteries die, I don't start the boat. I find it WONDERFUL that I can now relax with both my RV when "Dry Camping" and also on my boat while, well, "Wet Camping" I guess you could call it. The guys at M4 Products, especially Steve, have been great from the beginning and especially when I ordered the wrong LED's. I've used other LED companies in the past, but now I'll stick with M4 Products. I still have to convert my Harley Motorcycle, my F-150 Pickup and my Honda Big Ruckus Scooter too. Thanks M4 Guys!
-
Ceiling Lighting G4-6-5630-NW
Purchased these for ceiling puck lighting in my motorhome. They provide better and more light than the stock bulbs and work very well with the dimmer. The pins were a little larger than the stock bulbs so I called Steve at M4 and he told me how to make them fit with ease. No more heavy power drain when boondocking.
-
Bright Natural Light
I experimented with the different colors of LEDs from M4 and like this one best in the living areas of my RV. I do prefer the Warm White in the bedroom. It's easier on me to awaken to the warm white than the bright white. M4 makes it easy for me to learn about LED lighting and is a pleasure to do business with. I've purchased mostly the elite series lights and am very pleased with the quality and price... and quick service.
-
perfect light for reading
installed these in our RV, replaced all the halogen bulbs and they are so much nicer and cooler, Steve at M4 was a great help, thanks
-
RV Interior lights
I used these in several small puck lights on the inside ceiling lights in my RV. So far there working out great. So much cooler than the Halogen.
-
Replaced Range Hood Bulbs With LEDs
Ordered two of the G4-6-5630 to replace original heat-generating halogen bulbs in the range hood on my 2013 Navion motorhome. The bulbs fit perfectly in the small fixtures and provide what appears to be at least equal amount of light to the range area. I was pleased with the delivery, installation and result.