Product Description
Click Image for more pictures and specifications. Buy 10 per SKU and save 10%. See the bottom of this description for fitment information.
The best solution for the smallest fixtures. Very bright 5630 LEDs. Fits with reflector in place on most fixtures. Standard Pin Thickness 0.37"/1mm fits most fixtures, slightly larger for tight fit.
Available in:
Warm White (replicated incandescent light) part number G4-6-5630-WW
Natural White (outside light, slightly warm) part number G4-6-5630-NW
Cool White (bright white, brightest visually) part number G4-6-5630-CW (this item)
- Massive heat reduction
- 6 5630 SMD LEDs. 5630 are brighter than 5050 LEDs
- Dimmable with slide or rotary dimmers.
- Similar Light as the 10w halogens without the heat.
| Item Number | G4-6-5630-CW |
| Color Kelvin | 6000 |
| Calculated Lumens | 210 |
| Amps at 12.0v DC (Fluke Actual) | 0.07 |
| Rated Volts | 10-15v DC |
| Polarity | Non Polarity |
| Overall Length including pins | 1 1/4" / 30mm |
| Overall Width (or diameter) | 7/8" /22mm |
| Overall Height |
3/16" / 5mm |
Fitment:
When replacing most standard halogens, Thin Pin (-TP) drops into the socket easier. Some original halogens do have thicker pins though and the standard (thicker) pin will fit better, and the standard pin typically is better when replacing other existing LEDs.
Fit: This LED fits best in fixture with less than 1 1/2" at the measurement below:
Product Videos
Custom Field
Product Reviews
32 Reviews Hide Reviews Show Reviews
-
LED
Great product and great company to shop with.
-
17 Lights Replaced in an Hour
Ordered two Cool White, four Natural White and eleven Warm White lights to replace the "puck" halogen lights in my 2010 Pleasure Way Ascent. Accomplished this in about one hour. All were "Elite Series" that fit without removal of the reflectors. Had to use a brad (very small nail) to expand slightly the pin holes in the existing fixtures to accommodate the new light pins. On one circuit (but not both) that has a dimmer switch, there is a slight but audible buzz when the lights are on. Barely noticeable and likely the fault of the dimmer switch. Installed "Cool Whites" in the reading light fixtures, the "Natural Whites" in the kitchen work areas and "Warm Whites" in the main overhead lights. Looks good.
-
More than just selling a product.
I have an older coach (1997 American Eagle) and wanted to replace the halogen bulbs with a light with less heat and DC current usage. I ordered what I thought was the right LEDs but when I tried to replace the lights found that they were too large and could not fit into the reflector of the puck assembly. I called Steve and with e-mail of pictures to him he found the right LED to fit into the assembly. The turn around for the new replacement came in a few days and sure enough they fit. M4 wants to make sure their products are right for your application. By the way, I now have my coach house lights all replaced with M4 LEDs and am amazed at the difference.
-
LED replacement
I originally purchased 10 of these LEDS. One of the LED's only worked intermittently and I contacted M4 about replacement. They responded immediately with instructions plus I had the replacement within three days. This company is the best. Exceptional customer service, great prices and quality products. I'll be back.
-
LED's
Fast shipping. Great products and great price. Replaced my last motorhome with all LED's. When I recently traded it my new coach came with LED's. Took me two days to sell the prior LED's.
