Product Description
A very bright White replacement tail light or corner for trailers or vehicles. When possible, use Red lights under a Red lens or Amber under an Amber lens to accentuate and brighten the color. You can also use White, especially if your fixture also illuminates your license plate. Bright 5630 LEDs are twice as bright as 5050 size LEDs Aluminum cage works as a heat sink to draw heat away from the LEDs, and makes a more robust lamp.
This is a non-canbus light. Canbus is required on some vehicles if the vehicle computer checks for burned out bulbs, or for turn signals (may cause signal to blink rapidly). Trailer lights do not require Canbus LEDs.
If you don't know if you have a heavy duty relay, remove one bulb and turn on your turn signal. If the indicator and remaining bulbs blink at the normal rate, you can use this bulb as is, but if it blinks rapidly this is not compatible. A Load Resistor can also be put in the circuit to cure rapid blink problems.
This works with Standard 3156 Sockets. If you insert it and it doesn't light, remove it, turn it around, and reinsert it.
Total Length - 2 1/8"
Length of Head - 1 7/8"
Diameter - 3/4"
Voltage - 12v DC
Amp Draw 0.40A
Color - WHITE
Not DOT Certified.
