Product Description
Click Image for more pictures and specifications. Buy 10 per SKU and save 10%.
- This is designed to replace failed factory style LEDs with a much more reliable LED
- Fits Command Electronics Model #001-58 and some #001-57 and similar LED Fixtures, measure the width of your LED module and compare.
- New version with screw holes fits RSBF4-008 RSBF3-008
- Also fits Fasteners Unlimited 001-1050
- 10 5630 SMD Chips (larger diameter and brighter than RETROFIT-12-5050-WIRE
- 10-30V Circuitry to protect against RV power surges (look for the circuitry on the back)
- Full Aluminum Plate / Heatsink
- Natural White Light that resembles Outside Light (Warm White also available, see part number RETROFIT-10-5630-WIRE-WW or Cool White RETROFIT-10-5630-WIRE-CW).
- Constant Voltage, Non-Polarity
- Snaps into fixture (fixture not included) and includes wire nuts to reattach fixture to RV wiring
- Puck is 1 3/4" in diameter
- Installation Instructions can be previewed at http://m4sales.com/CEInstructions.pdf
- Dimmable with most standard dimmers
- Includes your choice of wire connectors, for more info see: http://m4sales.com/CrimpsandWireNuts.pdf
|
|
RETROFIT-10-5630-WIRE-NW |
|
Color Kelvin |
4500 |
|
Calculated Lumens |
350 |
|
Amps at 12.0v DC (Fluke Actual) |
0.15 |
|
Rated Volts |
10-30v DC |
|
Polarity |
Non Polarity |
|
Overall Width Direction 1 |
1 3/4" |
|
Overall Width Direction 2 |
1 5/8 |
|
Overall Height |
3/16" |
Product Videos
Custom Field
Product Reviews
38 Reviews Hide Reviews Show Reviews
-
RETROFIT-10-5630-WIRE-NW REPLACEMENT FOR C.E. 57/58 LED FIXTURE NATURAL WHITE
I've had to replace 25 LED pucks so far with the M4 product in our DRV (OEM sucks). So far, so good. Turned my buddy on to M4 and he's replaced over 30. Only drawback is the guage of the lead wires...needs to be 1 size larger for a good wire nut or butt connection.
-
great replacement
The replacement LED board just snapped into place in the original housing, spliced the wires and I was done. Took about 5 minutes.
-
retrofit -10-5630-wire-nw replacement
Well i just received my lights, a pond first looks they seem to be well built , it was easy to replace existing lights.They seem to be about 20% brighter, only time will tell if they last longer then the original . As for now I'm happy with my purchase.
-
Retrofit LEDs
Bought 5 of these and were easy to replace and have lasted a long time. I just purchased 3 more due to the factory lights quit. Great product
-
Replacement LED
Wire gage should be heavier. I'm concerned it may overheat because of the small Gage wires M4 Note: There is zero concern on the wire gage, it is designed properly for the LED current draw. These LEDs draw less than 0.23 Amps, it is proper. If you ever have any technical questions before, during, or after the installation, please contact us, we are here to communicate with you.
-
Replacement bulb
The bulb was for my Rv and I have not installed it yet.. but between you sales and service I was able to figure out what the bulb was out of what seemed like an ocean of options and I couldn’t get any help locally .. from the local camper stores . ThanK You for getting me to what looks like the exact match.
-
Retrofit -10-5630 Natural White
Excellent replacement for the command electronics disco lights, Great support!!!!!!!
-
RETROFIT-10-5630-WIRE-NW REPLACEMENT FOR C.E. 57/58 LED FIXTURE NATURAL WHITE
Replaced 15 lights 2 weeks ago. Good figment into old housing, easy wiring. Works on standard and dimming switches. Ordering and shipping were quick and easy too.
-
LED circuit bulbs
Excellent quality, easy to replace originals and they outlast the originals from Command Electronics.
