Product Description
An alternative to this item is part number RETROFIT-12-5630-BTN-CW for clip in Command Electronic Fixtures. Just leave the push button in the On position and put the lens cover on and it works the same as a buttonless module.
Click Image for more pictures and specifications. Buy 10 per SKU and save 10%.
- This is designed to replace failed factory style LEDs with a much more reliable LED
- Fits Command Electronics Model #001-58 and some #001-57 and similar LED Fixtures, measure the width of your LED module and compare.
- New version with screw holes fits RSBF4-008 RSBF3-008
- Also fits Fasteners Unlimited 001-1050
- 10 5630 SMD Chips (larger diameter and brighter than RETROFIT-12-5050-WIRE
- 10-30V Circuitry to protect against RV power surges (look for the circuitry on the back)
- Full Aluminum Plate / Heatsink
- Cool White Light sterile white light (Warm White also available, see part number RETROFIT-10-5630-WIRE-WW, or Natural White see part number RETROFIT-10-5630-WIRE-NW).
- Constant Voltage, Non-Polarity
- Snaps into fixture (fixture not included) and includes wire nuts to reattach fixture to RV wiring
- Puck is 1 3/4" in diameter
- Installation Instructions can be previewed at http://m4sales.com/CEInstructions.pdf
- Dimmable with most standard dimmers
- Includes your choice of wire connectors, for more info see: http://m4sales.com/CrimpsandWireNuts.pdf
|
|
RETROFIT-10-5630-WIRE-CW |
|
Color Kelvin |
6000 |
|
Calculated Lumens |
350 |
|
Amps at 12.0v DC (Fluke Actual) |
0.15 |
|
Rated Volts |
10-30v DC |
|
Polarity |
Non Polarity |
|
Overall Width Direction 1 |
1 3/4" |
|
Overall Width Direction 2 |
1 5/8 |
|
Overall Height |
3/16" |
Product Videos
Custom Field
Product Reviews
12 Reviews Hide Reviews Show Reviews
-
It works.
Although it techincally works, it did not fit onto the model number fixture igot it for. Cant blame it on the seller too much there might be a lot more varients of that fixture than they think. On mine the screw holes didnt line up and there was no way for me to clip it into the fixture as it was just a metal plate inside. I ended up screwing it to just 1 screw hole so its not centered on the fixture but it does work. M4 Note: I had the customer send me a picture of the fixture. His fixture is not a Command Electronics or Sunlink listed as what this directly replaces. His fixture is not one with a direct drop in, but this module is still the best option, you just drill a couple small screw holes in your existing backing plate and it goes right in centered. When you have a question, please ask. The "3 stars" -is- blaming the seller (us) while trying to install it in a fixture that is not listed.
-
Retrofit led lighting
Easy to replace bad RV lights. Also these lights will last allot longer. Highly recommend
-
10-5630 wire cw
Perfect. Easy to install. Great fix
-
ETROFIT-10-5630-WIRE-CW REPLACEMENT FOR C.E. 57/58 LED FIXTURE COOL WHITE
Working well and easy to install.
-
Retrofit - 10-5630-WIRE - CW - REPLACEMENT FOR COMMAND ELECTRONICS 3 INCH lED
My RV came from the factory with Command Electronics 3INch LED fixtures. Over the past 4 years I have replace every light, some multiple times, due to flashing lights and loose LEDs on the board. The M4 replacement lights fit perfectly in the housing and are working great. The circuit boards seem to be better manufactured. I recommend replacing your Command Electronics lights with those from M4.
-
Retrofit-10-5630-wire-cw replacement
We love the color and looks in our DRV 44 Houston. The only concern I have, which is minimal, is that it seems the new LEDs interfere with our television reception (antenna). When we turn the lights on, we lose some channels. M4 Note: Interference is rare, but can happen, we have found that every RV is unique. Those channels probably have a marginal signal. Also ensure good coax to the antenna, and no light directly next to it in this instances.
-
RETROFIT-10-5630-WIRE-CW
FANTASTIC!!! Plug and play, couldn't be any easier to replace the burnt out originals in the RV. This is our second order and should take care of most of the rest of the lights, even the ones that aren't burnt out (yet)!! Highly recommend!!!!
-
Excellent replacement light. Fit, form, and function perfect and better than OEM light.
Only took a few minutes to install. Everything was in the box to replace the flickering OEM light.
-
led lights
These replacements work great in the original housing, I ordered cool white ( much brighter ) when my original lights I believe were natural white.
