Product Description
Click Image for more pictures and specifications. Buy 10 per SKU and save 10%.
Now with 30 Brighter Cool White Light 2835 SMD LEDs. Also available in Warm White
Easy push installation
Standard T10 Wedge base - may ship silver or white Cross References to incandescent bulbs 904, 904NA, 906, 906NA, 912, 916, 916NA, 917, 920, 921, 922, 158, 160, 161, 161B, 168, 168A 168NA, 175, 193, 194, 194B, 194G, 194NA, 194R, 2821, 2825, 2827, 2886X, 3652, 558, 579, 658, W5WB
10-30 Volts Continuous Power No Polarity
Calculated 150 Lumens
Good economical choice. For Visibly Brighter bulbs see our bulbs with 5050 SMD LED chips
Important Information about Lumens and Visual Light Output
Specifications | |
Item Number | 921-30-2835-CW |
Color Kelvin | 5500 |
Calculated Lumens | 150 |
Amps at 12.8v DC (Fluke Actual) | 0.17 |
Rated Volts | 10-30v DC |
Polarity | Non Polarity |
Overall Length | 1 3/4" |
Overall Width (or diameter) | 3/4" |
Overall Height | n/a |
Product Videos
Custom Field
Product Reviews
48 Reviews Hide Reviews Show Reviews
-
Replacement from Standard to LED
Could not be happier. Great product - excellent service (returning calls, shipping and advise) Bought these for the basement of the 5ver . Takes a few seconds longer to put them in for the first time. Well worth it.
-
wedge base thicker than originals
After applying some dielectric grease i managed to get the bulbs partially in the fixture but every now and then they come loose and i have to put some pressure on them to push them in. Cannot get them to go all the way in M4 Note: Popping out is not a normal report, I would like to hear more of your fixtures. Original glass bulbs can be thicker or thinner, we tend to stay on the thicker side so that they don't fall out of sockets from being too loose. Once seated though, they should stay, possibly reduce the di-electric grease amount.
-
led wedge bulb
Nice and bright at a fair price
-
BASE THICKNESS
The Bulbs are very bright just what I wanted in my vanity area, I had warm white but they just werent bright enough for the dark area. Whit that being said the only problem with the bulbs is the thickness of the base, I used "bulb" grease to get them in the sockets but even then one of them split the plastic socket M4 Note: Our bases are a standard thickness. Glass bulbs can vary in thickness, so we size in the middle so there they are not loose in fixtures that have had thicker incandescent bulbs in them before. When installing, rock them slightly back and forth (along the length of the tab) and they will install easier. Unfortunately some plastic sockets are brittle from long use of very hot incandescent bulbs.
-
Recommend by the RV Geeks
Works very well changed all the basment bulbs in my RV Really made a substatial diffences in brightness and less current draw and much cooler One thing, mine are "wedge based " bulbs and the LED's base is some what thicker than the originals making it a little harder to install, bulb grease made it a lot easier Very prompt services have ordered from M4 many times always satisfied with service
-
Very bright lights
I chose this particular LED light because it was the least expensive. The light is very bright. Pulling out the old lights and inserting the new light takes a bit more pressure than I was expecting. Once I figured that out, replacing them was easy. Very happy with them and plan on buying some more to replace the rest of the lights in my RV.
-
RV Replacement Bulbs
Other bulbs were gettting hot and did not put out alot of light. These new leds are great and don't put put out very much heat!
-
very supprised with bright whiteness
Satisfied enough to order more three different times. These are as bright as the Samsung at much lower cost. All orders arrived in Texas in two days!
-
Great lihting
Installed two to try out and was really impressed, so impressed that I ordered enough to replace all of the lights in my fifth wheel. Simple to replace and great lights.