Click Image for more pictures and specifications.
Compare all of the features of this kit!
- Now with a Rf Controller (no line of site needed from the remote the the box, Radio Frequency) THE RF VERSION DOES NOT HAVE A ANTENNA WIRE ON THE CONTROLLER AS SHOWN IN THE PICTURES
- 6 Meters (19.6') of light
- 60 5050 LEDs per meter (competitors use less LEDs or smaller/cheaper LEDs)
- Includes a 3 meter RGB extension cable so you can install the controller/receiver in a dry area
- Includes a 120v transformer to run the lights on house power, or don't use the transformer and run it on 12vDC
- Multi-function 44 button remote
- Set a color, rotate through colors, different ways to change color, change speeds, many display options.
- Strip can be cut to length every 3 LEDs
To be used under your RV awning, or anywhere else you want to add some color. Most choose to stick these to the side of the RV right under the drip rail of under the awning. They work off of 12v and can be cut to size every 3 LED chips.
The Kit Includes:
- 1pcs 6m RGB Color Changing Water Resistant Strip Light with adhesive tape
- 1pc 3m Control Extension Cable and male/male interconnector so you can install the controller in a dry area inside the RV or a compartment.
- 1pc Rf Controller/Receiver
- 1pc 120v AC to 12v DC transformer with power cord
- 1pc Rf remote control with battery
10 Reviews Hide Reviews Show Reviews
Bright, install well . really great feature RF remote that will control multiple light strips.
Used for a game trailer.. Garrett Custom Trailers
Steve is a standup guy. He tells you what he know to be the truth and will discuss possible solutions with you.
I have bought several products from M4 (some we were not sure would work) we wanted to try. Steve was very up front about the issues I might face. Some worked others didn’t (nothing to do with the products) all to do with the electronics on my Motorcoach (very complex stuff).
I purchased some Colorv LED lighting for my coach more than two years ago (out of warranty). One set stopped working, so I contacted Steve for assistance on what I could purchase to get them working. Together we determined which part was the problem an I sent the part to Steve so he could insure my diagnosis. To my great surprise and pleasure he replaced the part free of charge.
That is great service. Thanks fir being a stand up Guy Steve.
The LED strip is absolutely worth the money - Bright and easy to install.
However - when switching between colors and different feature i have to put the remote with-in inches of the sensor bulb. I would have thought it would have worked up to a better distance (10 -15 feet). In some cases it takes forever for the remote to actually switch the LEDs to the different features.
I'm not sure if I have an issue with my remote, however that feature doesn't work as I had hoped.
M4 Note: This item uses a line of site IR remote like a TV set. Ensure that the antenna that hangs off the controller is visible to the remote. Also, do not have the antenna in an area with high background lighting or other visual interference. The remote must be pointed at the visual receiver, and a distance of around 6 feet is normal for this type of IR receiver. Adjust your install as necessary and you should have better results. We like to install them right inside the RV door, open the door, switch the lights, and enjoy the light effects. You will find one likes to play with all of the different color setting initially, but typically sets it to one color or sequence they prefer after that. I hope this helps.
We had one of these installed 3 years ago at the dealership and paid a very high price for the quality. The kit supplied by M4 was superior to the unit we had on our RV. I followed the instructions and had very successful results. Will always look at Steve's website for additional product offering.
We are going to go on our first dry camping trip and thought I would put up some LED Strip Lights. I was a little concerned as to how long they would stay up after talking with others who said their LED's fell down within a day. Of course the difference was that they used a different brand then M4 Products. You must wipe down the surface with alcohol before installing to allow the 3M adhesive to stick properly. My other concern was the antenna. Since it is an IR antenna, it must be able to see you. Putting it in a cabinet will not work. I put ours in the same hole the LED lead came through the side wall and it works from the outside. Steve was great in giving me a couple of tips on installation by e-mail in a timely fashion. Will definitely buy more products from M4
I bought this to install on my RV awning. I mounted this on the roller tube of the awning, so it would shine towards the rv, instead of on the body shining outward as it's intended. To do so, I also purchased an extension 4pin RGB cable to complete the required run. We are so thrilled to have vastly improved lighting on the exterior of our RV! Must have upgrade if your RV didn't come with nice exterior lights.
Being able to dim them was a must-have for me as well, and in addition to different colors, the dimmer works great.
I've already recommended it to a neighbor.
Product does exactly what is says it can do. However, we had an issue with he polarity going into the controller box from the 12v outside light fixture. Steve at M4 was able to find the problem after all we could do was get a green light from the strip and no response from the remote.
We have a Jayco GreyHawk C Class.
We installed ours under the rain gutter and it fits perfectly under it. We didn't trust just the adhesive on the back so we added clear silicon adhesive.
M4 Note: Tim installed his as a 12 installation. To do this, you cut the cable off the 120v/12v transformer and use the 12v side of the cable. If you hook up both the 12v cable backwards plus you have the RGB cable backwards, it will only light green. If you correctly hook up both connections, it works as designed.
this is the third item I have received from M4. outstanding company, prompt shipping .don't even bother trying to buy led light anywhere else. these are the real deal. I've tried the Chinese junk and ended up throwing in the garbage
We just purchased these lights for our Motorhome. We I stalled them 2 days ago. They are quite impressive.
One concern that I have is where the cord attaches to the light string. One of the two strings I purchased seemed to make a better connection than the other one. Time will tell.
Two it would be better if the extension cord that is provided came in two pieces with a round plug yo join the two sections. This would make installation much easier. Just drill a hole push the round plug through and you are almost done. I had to drill a small hole and then make it rectangular to avoid having to drill a larger hole. The hole has to be repaired and sealed so the smaller it is the easier the repair.
Steve sells great products and I would recommend that you should have no concerns about the quality of his products.
It would be better if he could figure out a less expensive way of shipping to Canada.