Product Description
Click Image for more pictures and specifications. Buy 10 per SKU and save 10%.
- Measure before you buy. See last point regarding Micro Fixtures.
- Massive Heat Reduction from Halogen
- 12 5050 SMD Chips
- 10-30V Circuitry to protect against RV power surges (look for the circuitry on the back)
- Brighter then original 10w halogens without the heat. Can also be used in place of 20w halogens but will not be as bright
- Warm White Light that resembles Incandescent Light (Bright Cool White also available, see part number G4-12-5050-TYPE1-CW)
- Constant Voltage, Non-Polarity
- Easy pull out, push in installation
- 0.12A per bulb (Fluke actual reading)
- 180 Lumen rating, and they point straight down where you need them.
- Not dimmable. For dimmable LEDs look at our G4-6 or G4-18 range Elite Series replacements (not G4-9)
- Puck is 1 1/4" x 1/4" plus pins
- Will fit most 10 watt Halogen Puck Light Fixtures, but not Micro Fixtures. Ensure you have 1 1/2" total length from the socket to the far side of the inside of the fixture to accommodate the light. If you fixture measures less than 1 1/2" at that dimension, you will need to use our smaller yet just as bright Elite Series G4-6-5630 retrofits.
|
G4-12-5050-SIDE-WW |
Color Kelvin |
3200 |
Calculated Lumens |
180 |
Amps at 12.0v DC (Fluke Actual) |
0.12 |
Rated Volts |
10-30v DC |
Polarity |
Non Polarity |
Overall Length including pins |
1 1/2" |
Overall Width (or diameter) |
1/1/4" |
Overall Height |
3/16" |
Product Videos
Custom Field
Product Reviews
25 Reviews Hide Reviews Show Reviews
-
Great solution to the Warm White need
Have used other brands and found that the M4 warm white is the best for warm white color and for the stability holding up to an inverter environment.
-
Efficient & Effective Replacements
This is my fourth order of M4 replacement LEDs. The warm white puts out a glow similar to an incandescent bulb. Most of the prior 23 LED bulbs are doing well after several thousand hours. With a little trial and error, I learned to order the correct size and type for the fixture. A couple of bulbs have failed prematurely, but M4 has been responsive.
-
Well made product. Little hard to install
I like the product. It is well made and the lighting effect is excellent. I although my lighting fixtures had the correct measurement from base to inside the fixture, I found the side pins to be about 1/8" to 3/16" too long which resulted in having to force the bulb into the fixture. This put excessive pressure on the bins to get them to set properly That resulted in one pin being broken off (got it soldered back on). Thus on the remaining bulbs I trimmed the appropriate length off of the pins and they installed easily. I was later informed by M4 that they had a smaller bulb that would probably work better. Right now, all bulbs are installed and functioning well. I am happy with the product and will order the smaller bulb for future installations. Wonderful service. Prompt shipping and great response to my questions.
-
larry on7-3-15
warm light with no heat which is a must for lights in trailer in Texas in summer. had a 30' pull a long and changed all lights to LED. Now have 5th wheel and am working on changing it over. Great price, service and shipping!!
-
Great Service Great Lights
We replaced all of our lights with the warm white pucks & the aluminum plate styles. Had one failure, but M4 replaced it the very next day.
-
LED's are a bright idea
this is the second time I've ordered LED's from here to upgrade our motorhome. we traded and I've done it again. these lights are the best of quality and price combo. customer service is great and a pleasure to do business with. directions with the lights are spot on and are an easy replacement.
-
excellent excellent
M4led's products are great, service is prompt and free shipping is fast.
-
Excellent lighting
We are really enjoying our new puck lights in our motor home. We did have one failure, but M4 replaced it as soon as they were notified. We will be replacing all of our lights with LED lights soon.
-
side warm white puck lights
I just finished up my MH puck lights and am very happy. I did have a semi-failure with one but it was replaced by M4 as fast as it could be done. I will now start converting the floresents as money allows.